Untitled 4

Explosion Proof Plate Mounted Axial Fan

The PAF series are explosion-proof plate mounted axial fan with air inlet bellmouth and are used for the hazardous conditions of industrial and commercial ventilation where large volumes of air are required at moderate to high pressures. This product specially applies to Oil & Gas, Offshore Platform, Chemical, Petrochemical, Refinery and Marine Industries etc. They are also an excellent choice in specialised HVAC system and hazardous areas applications. The aerofoil axial impellers were developed with advanced technologies of London Fan company, a world famous axial impeller manufacture which was set up in 1928. They are designed to bear the ATEX or IECEx standard.

  • Material: Mild steel with epoxy coated or requested
  • Range Size: 315mm – 1000mm
  • Air Volume: 70.000 m3/h
  • Pressure Range: 1.000 pa
  • Motor: IP55 and Class F.

contact us


    • Explosion-proof plate mounted axial fan is made of mild steel with epoxy coated after manufacturing.
    • Thickness of plate casing is from 2.0mm to 4.0mm upon diameter.
    • Airflow direction:
        • Plan B as standard is from impeller to motor.
        • Plan A can be supplied if required.
    • High efficiency aerofoil type.
    • All units are fitted with Breezax Impellers with AST (Anti-static Nylon) blades as standard or Aluminum (AL blade) material if required.
    • Are imported from London Fan Company in United Kingdom.
    • Hubs are manufactured from fully die cast aluminum alloy as standard.
    • The blades are with adjustable pitch angle to optimize the duty point.
    • Motors incorporated are TEFC (Total Enclosed Fan Cooled) and IEC 34-1.
    • Standard motors are protected to IP55 with range class F insulation and operating temperature is from -20°C to +40°C.
    • For motors provided with PTC posistor sensors that should be connected to the protection system.
    • The range covers Gases Group IIA, IIB & IIC and most dust hazards.
    • The Gas or Dust type must be specified.
    • Motors are suitable for speed control by frequency inverter, subject to fan selection.
    • Available specific for your project requirements such as:
        • 220-240V / 380-415V-50Hz.
        • IE2, IE3 and IE4 Efficiency Classes.
        • Explosion proof motor: Class H and IP56 or IP66.
        • Hazardous location rated: Exe, Exd, ExnA, Extd.


    • Full details are available on our selection program.
    • Manufactured under a certified ISO 9001:2015 Quality Management System.
    • ATEX or IECEx standard.
    • The performance is tested international standards by BS 848-1:1985 and ISO 5801.
    • All curves to a density of p = 1.2 kg3/m, at 20°C.
    • All measurements of the sound that the fans generate have been taken strictly in accordance with BS 848-2:1985 for test method 1 and ISO 13347-2 for acoustic performance.
    • Sound data are determined according to BS EN ISO 5136 – In-duct method.
    • ISO 12759 Fans – Efficiency classification for fans.
    • Installation position A, i.e. free ducted inlet and free ducted outlet configuration.
    • Dynamically balance according to ISO 1940 with G2.5 mm/s quality standard.

    Please contact our sale department or login http://www.breeze.com.vn for selection program.


    Due to our continued efforts to improve product design and performance, Breeze reserves the right to alter any product details specified here without notice.

    MODEL PA 2020

    No Video

    Video clip

    Breeze Fan is a member of London Fan Group in United Kingdom.

    Assembly Details to Axial Flow Fan | LC Series | LCS Series | LCF Series | Breeze Fan

    Disassembly Details to Axial Flow Fan | LC Series | LCS Series | LCF Series | Breeze Fan

    Bearing Mounting and Balance Guide | Breeze Fan

    Back To Top